Open Nav

注塑模的参数控制型腔布局老版太子报系统

以下是大纲或介绍,如需要完整的资料请购买下载.
1.无需注册登录,购买下载后即可获取该完整的资料.
2.购买后本站提供下载链接或联系客服发送资料.
??
资料介绍

注塑模的参数控制型腔布局老版太子报系统(中文6100字,英文4000字,英文PDF)
M. L. H. Low and K. S. Lee
机械工程系,新加坡大学,新加坡
摘要
如今,塑料产品的上市时间变的越来越短,因此,制造注塑模的可用交货时间也变的少了。在模具的老版太子报阶段有个省时的潜在方法,因为由于每个模具老版太子报可以是标准化的,所以一个老版太子报程序可以被重复使用。本文提出了一种通过使用标准模版来控制几何参数的方法来老版太子报注塑模的型腔布局。标准模版的型腔布局老版太子报包括可能布局的配置。每个布局老版太子报的配置都有其特有的由所有几何参数构成的布局老版太子报表格。这个标准模版是预定义在合型老版太子报的布局老版太子报的级别时的。这样就能够确保要求的配置能够被快速地输入到模具装配老版太子报中,而不需要重新老版太子报布局。这使得它在模具制造前产品老版太子报师和模具老版太子报师之间的技术讨论上更有用。在讨论时直接改变3D型腔的布局老版太子报,这样可以节省时间和避免错误传达。型腔老版太子报的标准模版便于各个模具制造公司依照顾客具体要求而制造他们各自的规格。
关键词:型腔布局老版太子报;几何参数;合型;注塑模老版太子报;标准模板

一、??? 外文原文
A Parametric-Controlled Cavity Layout Design System for a Plastic Injection Mould

[毕业老版太子报论文网 www.xmsyz.com]


M. L. H. Low and K. S. Lee
Department of Mechanical Engineering, National University of Singapore, Singapore
Today, the time-to-market for plastic products is becoming shorter, thus the lead time available for making the injection mould is decreasing. There is potential for timesaving in the mould design stage because a design process that is repeatable for every mould design can be standardised. This paper presents a methodology for designing the cavity layout for plastic injection moulds by controlling the geometrical parameters using a standardisation template. The standardization template for the cavity layout design consists of the configurations for the possible layouts. Each configuration of the layout design has its own layout design table of all the geometrical parameters. This standardisation template is pre-defined at the layout design level of the mould assembly design. This ensures that the required configuration can be loaded into the mould assembly design very quickly, without the need to redesign the layout. This makes it useful in technical discussions between the product designers and mould designers prior to the manufacture of the mould. Changes can be made to the 3D cavity layout design immediately during the discussions, thus saving time and avoiding miscommunication. This standardisation template for the cavity layout design can be customised easily for each mould making company to their own standards.
[毕业老版太子报论文网 http://www.www.xmsyz.com]

Keywords: Cavity layout design; Geometrical parameters;
Mould assembly; Plastic injection mould design; Standardisation
? [毕业老版太子报论文网 www.xmsyz.com]
注塑模的参数控制型腔布局老版太子报系统

?

[毕业老版太子报论文网 www.www.xmsyz.com]
  • 关于资料
    本站提供的资料属原创,内容严格把关,均审核通过的,保证质量和规范.
  • 关于发货
    提供下载链接或发送至您的邮箱,资料可重复发送,确保您收到为止.
  • 疑难解答
    收到资料后若有任何疑难问题,均可通过本站客服提供帮助解决.
  • 售后服务
    我们确保发送的资料和介绍一致,如核实为不符,可以申请退换.
  • 资料仅供参考和学习交流之用,请勿做其他非法用途,转载必究,如有侵犯您的权利或有损您的利益,请联系本站,经查实我们会立即进行修正! www.xmsyz.com 版权所有,严禁抄袭
    苏ICP备09049588号 |
    新媒体新闻稿